DID YOU KNOW?
- Recycling cardboard only takes 75% of the energy needed to make new cardboard
- Recycling one ton of used cardboard will save 46 gallons of crude oil
- Majority of the worlds shipped products use cardboard in packaging
- Robert Gair is the inventor of cardboard boxes
WHAT IS A BALER MACHINE?
A baler machine is a useful piece of recycling equipment. The press installed within the baler presses together waste materials, such as cardboard, which can then be tied together to create a bale.
Baler machines are primarily used to deal with waste cardboard and soft plastic; but they are also flexible enough to bale more bespoke materials such as carpet, cans, and hard plastic. Balers are a solution to having bins on-site, which overflow and are expensive to empty as they reduce the space occupied by these materials, thanks to being in bales.
Lots of businesses produce a steady flow of cardboard, which is a nuisance once it is no longer needed. Placing each cardboard box inside a baler machine saves time on flat-picking and space inside a bin. When the cardboard baler is full, it will crush the cardboard down and it can then be tied together, removed from the machine, and stacked neatly in a corner - it is then ready to be collected by a recycler. The same process applies to soft plastic materials. There is then no need to have any cardboard or plastic bins on-site and both materials will not end up being mixed in with general waste. Not only does the baler machine reduce the cost of recyclable waste, but they also aid in boosting an organization's corporate social responsibility as there is no longer a chance of the recyclable materials mixing with general waste.
Equipment for recycling cardboard, such as cardboard baler machines, come in various shapes and sizes subject to the requirement. Each business will produce varying amounts and different types of waste so it is important they acquire a baler that suits them and their recyclable load perfectly.
Businesses such as restaurants, pubs, offices, and shops would in all likelihood require a small to medium baler because of potential space restrictions and the amount of waste they will produce. Compare this with a factory for example, which may need a mill size baler to handle a much larger stream of waste and they have the space for a much bigger baler machine.
Baler machines are also environmentally friendly. Turning waste cardboard and plastic into bales means it is not dumped loose in a bin and sent to landfill. Instead, the bales are collected by a recycler. Depending on the heaviness and quality of the bales, recyclers are also willing to give rebates for the baled material, something you can only get with a baler machine.
To conclude, baler machines have the potential to save businesses money, space, and time. All three are issues when there are bins on site but with a waste baler, the need for bins significantly decreases.
| Model |
MB-850B |
MB-1250B |
MB-1250F |
MB-1250 F Customzied |
| Pressure |
150 tons |
160 tons |
180 tons |
160 tons |
| Main Power |
37KW |
45KW |
45KW |
45KW |
| Feed Opening Size |
1100*2000 mm |
1100*2000 mm |
1100*2000 mm |
1100*2000 mm |
| Cooling System |
water cooler |
water cooler |
water cooler |
water cooler |
| Bale Size |
1100*850*L mm |
1100*1250*L mm |
1100*1250*L mm |
1100*1100*L mm |
| Bale Density |
450-500kg/m3 |
450-500kg/m3 |
450-500kg/m3 |
450-500kg/m3 |
| Machine Weight |
13 tons |
15 tons |
17 tons |
21-28 tons |
| Thoughput |
7-9 tons/hr |
8-12 tons/hr |
10-16 tons/hr |
10-16 tons/hr |
| Overall Dimension |
8500*1350*4650mm |
9600*1350*4650mm |
9600*1350*4650mm |
9600*1350*4650mm |
| Oil Reservoir |
1.5L |
1.6L |
1.6L |
1.6L |
| Wire Size |
Ø 3.0-3.2 |
Ø 3.0-3.2 |
Ø 3.0-3.2 |
Ø 3.0-3.2 |
| Cycle Time (unload) |
14s |
14s |
14s |
14s |
| Conveyor |
| Feeding Width |
1600mm |
2000mm |
2000mm |
2000mm |
| Speed |
12m/min |
12m/min |
12m/min |
12m/min |
| Power |
5.5 KW |
7.5KW |
7.5KW |
7.5KW |
| Weight |
3.5 tons |
3.5 tons |
3.5 tons |
7 tons |
| overall Dimension |
11000*2000*4500mm |
11000*2000*4500mm |
11000*2000*4500mm |
11000*2000*4500mm |
FAQ:
Q: Why use a baler?
A: In order to effectively handle your recyclable waste or resources, you need a baling machine to compress the waste material into a baler. neat and tidy bales not only reduce your storage space,it also reduces your transportation cost because you can certainly load more cardboard bales into a container or truck as compared to the loose ones.
Q: Who uses a baler?
A: Shopping malls, retail stores, grocery stores, marine vessels, need a baling machine to help them compact the waste such as cartons, cardboard plastic films so that they can be stored easily before selling to the recycling plant. Corrugating and printing company, need baling to compact the waste paper trims. Recycling plants need a baling machine to compact into small bales for easy transportation and save cost.
Q: Where to buy a suitable baler?
A: Maxborn is baling machine manufacture for more than 15 years with CE, which can help you narrow down which hydraulic baling presses are ideal to bale the waste material you are handling as well as matching it to your expected output capacity. You can choose our standard models and we can also provide the customized baling machines.
Q: How to choose a suitable baler?
A: a type of material you will be baling. For example, if you need a baling press to bale plastic, you should specify the exact type of plastic.-ie PET bottles?HDPE containers plastic bags?Plastic film? b.Bale size and output requirement say how many tons per day or per hour?
TO KNOW MORE HOW TO CHOOSE A QUALIFIED BALER MACHINE, CONTACT US FOR A CHECKING LIST.
Packing details:
Size: 2*40 HQ
Weight: 14000~28000KG
Delivery time: Within 14-25 days after order confirmed, based on order quantity.
Port of loading: Tianjin port
Meet The Team
Chia Wong started MAXBORN after 10 years of experience with a marketing firm. Her mission was to reduce overall customer costs by providing the highest quality equipment consistent with customers' requirements.
Eng. Zhang joined the company after graduating from college in 1991. He became an engineer manager in 1997 after extensive field experience. Have a question about what the best machine would be for your space and challenge? Zhang will help you select the right equipment and get you up and running with efficiency and ROI in mind.
Mr.Zhao, joined the company in 1999, shortly after graduating from college. Our company service manager, zhao expertly routes service personnel, makes sure that truck inventory is maintained, and meets and exceeds our customer service deadlines. Have a true service emergency? zhao is the guy who can put your mind at ease with accurate information.
Contact us for a no-obligation on-site survey to determine your exact requirements. It is our company policy never to oversell or undersell.
BACK HOME
Audited Supplier 
){kind=link}